Linery – MS Spektrum

Septy, linery, ferrule

Agilent

Rysunek	Opis	Wymiary [mm]	L. szt. w opak.	Nr katalogowy
	4.0 mm ID Split / Splitless FocusLiner	4.0×6.3×78.5	5	092002
	4.0 mm ID Split / Splitless FocusLiner	4.0×6.3×78.5	25	092219
	4.0 mm ID Split / Splitless Tapered FocusLiner	4.0×6.3×78.5	5	092003
	4.0 mm ID Split / Splitless Tapered FocusLiner	4.0×6.3×78.5	25	092011
	2.3 mm ID Split / Splitless FAST FocusLiner	2.3×6.3×78.5	5	092005
	2.3 mm ID Split / Splitless FAST FocusLiner	2.3×6.3×78.5	25	092008
	2.3 mm ID Split / Splitless Tapered FAST FocusLiner	2.3×6.3×78.5	5	092111
	2.3 mm ID Split / Splitless Tapered FAST FocusLiner	2.3×6.3×78.5	25	092115
	4.0 mm ID Split, straight-through liner	4.0×6.3×78.5	5	092007
	4.0 mm ID Split, straight-through liner	4.0×6.3×78.5	25	092222
	4.0 mm ID Spilt, with quartz wool	4.0×6.3×78.5	5	092001
	4.0 mm ID Spilt, with quartz wool	4.0×6.3×78.5	25	092220
	4.0 mm ID Split / Splitless with single taper	4.0×6.3×78.5	5	092017
	4.0 mm ID Split / Splitless with single taper	4.0×6.3×78.5	5	092229
	4.0 mm ID Split / Splitless with single taper and quartz wool	4.0×6.3×78.5	5	092019
	4.0 mm ID Split / Splitless with double taper	4.0×6.3×78.5	5	092018
	4.0 mm ID Split / Splitless with double taper	4.0×6.3×78.5	25	092230
	1.2 mm ID Direct, straight-through liner	1.2×6.3×78.5	5	092016
	1.2 mm ID Direct, straight-through liner	1.2×6.3×78.5	25	092224
	2.0 mm ID Splitless (quartz), straight-through liner	2.0×6.1×78.5	5	092004
	2.0 mm ID Splitless with Recessed Gooseneck	2.0×6.3×78.5	5	092013
	4.0 mm ID Split / Splitless. Recessed Gooseneck with quartz wool	4.0×6.3×78.5	5	092010
	4.0 mm ID Split / Splitless. Recessed Gooseneck with quartz wool	4.0×6.3×78.5	25	092223
	1.8 mm ID Packed column liner for Agilent Technology Models 5880, 5890, 6890	1.8x3x92	5	092234
	1.8 mm ID Packed column liner for Agilent Technology Models 5880, 5890, 6890	1.8x3x92	25	092235
	Viton Sealing Rings – suitable for all inlet liners above except 092234 and 092235. Can be used at temperatures below 300°C.		10	0726532
	Graphite Sealing Rings – suitable for use with 092016, 092018, 092224, 092230. Can be used at temperatures above 250°C.		10	0726003
	Graphite Sealing Rings – suitable for use with 092001, 092002, 092003,092005, 092007, 092008, 092010, 092011, 092013, 092017, 092019, 092111, 092115, 092219, 092220, 092222, 092223, 092229. Can be used at temperatures above 250°C.		10	0726005
	Graphite Sealing Rings – suitable for use with 092004. Can be used at temperatures above 250°C.		10	0726006

SGE liner for AC Control Injector
	1.6 mm ID AC Control Sim Dist liner. Programmed Injector	1.6x3x73	10	092210
	1.6 mm ID AC Control Sim Dist liner. Programmed Injector	1.6x3x73	25	092211

SGE liners for Gerstel CIS 4 Injector
	1.8 mm ID, Sintered Glass. Large Volume Injection (LVI)	1.8x3x71	5	092243
	1.8 mm ID, Sintered Glass. Large Volume Injection (LVI)	1.8x3x71	20	092242

PerkinElmer

Rysunek	Opis	Wymiary [mm]	L. szt. w opak.	Nr katalogowy

AutoSystem™ & Clarus 500
	4 mm ID, Split / Splitless FocusLiner	4×6.2×92	5	092092
	4 mm ID, Split / Splitless Tapered FocusLiner	4×6.2×92	5	092095
	4 mm ID, Split, straight-through liner	4×6.2×92	5	092100
	2 mm ID, Splitless, straight-through liner	2×6.2×92	5	092103
	2 mm ID, AutoSys XL (PSS) Split / Splitless	2x4x86.2	5	092098
	2 mm ID, Split / Splitless FocusLiner for AutoSystem XL (PSS injector)	2x4x86.2	5	092101
	Large Volume Injection (LVI) liner for AutoSystem XL (PSS injector), sintered glass	2x4x86.2	5	092244
	3 mm ID, Packed Column liner	3x6x112	5	092236

8000 and Sigma series
	3 mm ID Split / Splitless	3x5x100	5	092091
	2 mm ID, Spliltess with single taper	2x5x100	5	092094

PTV Liner
	1 mm ID, PTV liner with 0.25 mm ID restriction (recessed gooseneck)	1x2x88	5	092097

Shimadzu

Rysunek	Opis	Wymiary [mm]	L. szt. w opak.	Nr katalogowy

Shimadzu 2010 Injector
	3.4 mm ID, Split / Splitless FocusLiner	3.4x5x95	5	092059
	2010 Viton O-Ring suitable for FocusLiner 092059		10	0726533
	3.4 mm ID, Split, straight-through liner	3.4x5x95	5	092064
	2.6 mm ID, Splitless straight-through liner	2.6x5x95	5	0920861

Shimadzu 17A (SPL-17 Injector) and Shimadzu 2014 Injector
	3.4 mm ID, Split / Splitless FocusLiner	3.4x5x95	5	092062
	3.4 mm ID, Split / Splitless Tapered FocusLiner	3.4x5x95	5	092068
	3.4 mm ID, Split / Splitless with recessed gooseneck and quartz wool	3.4x5x95	5	092061
	3.4 mm ID, Split, straight-through liner	3.4x5x95	5	092064
	3.4 mm ID, Split / Splitless with middle gooseneck	3.4x5x95	5	092085
	2.6 mm ID, Splitless straight-through liner	2.6x5x95	5	0920861
	2.6 mm ID, Direct (0.53 mm ID columns)	2.6x5x95	5	092087
	0.75 mm ID SPME liner	0.75x5x95	5	092089
	Graphite sealing ring suitable for all SPL-17 Injector Liners Maximum Temperature of 300°C		10	0726007

Shimadzu 14/15A/16 (SPL-14 Injector)
	3.4 mm ID, Split / Splitless FocusLiner	3.4x5x99	5	092065
	3.4 mm ID, Split / Splitless Tapered FocusLiner	3.4x5x99	5	092066
	3.4 mm ID, Split / Splitless with 2.0 mm middle gooseneck	3.4x5x99	5	092082
	3.4 mm ID, Split / Splitless with single taper	3.4x5x99	5	0920831
	3.4 mm ID, Splitless, Direct, wide bore liner for Shimadzu 9A/16A GC	3.4x5x99	5	092084

ThermoFinnigan

Rysunek	Opis	Wymiary [mm]	L. szt. w opak.	Nr katalogowy

Model 8000 / Trace / Trace Ultra
	5 mm ID, Splitless (with 70 mm needle) FocusLiner	5x8x105	5	092045
	5 mm ID, Split (with 50 mm needle) FocusLiner	5x8x105	5	092048
	3 mm ID, Splitless with single taper	3x8x105	5	092141
	5 mm ID, Splitless with single taper	5x8x105	5	092144
	0.75 mm ID, Splitless straight-through liner	0.75x8x105	5	092148
	3 mm ID, Splitless straight-through liner	3x8x105	5	092147
	5 mm ID, Split straight-through liner	5x8x105	5	092150
	2 mm ID, Thermo Finnigan Trace 2000 PTV liner	2×2.75×120	5	092142
	Graphite Sealing Rings – suitable for all inlet liners above		10	0726004

Mega series 4000 / 5000 / 6000
	3 mm ID, Split / Splitless, recessed gooseneck with wool	3x5x79.5	5	092041
	3 mm ID, Split straight-through liner	3x5x79.5	5	092044
	2 mm ID, Splitless straight-through liner	2x5x79.5	5	092047

Varian

Rysunek	Opis	Wymiary [mm]	L. szt. w opak.	Nr katalogowy

Injector Model 1177
	4.0 mm ID Split, straight-through liner	4.0 x 6.3 x 78.5	5	092007
	4.0 mm ID Split, straight-through liner	4.0 x 6.3 x 78.5	25	092222
	4.0 mm ID Spilt, with quartz wool	4.0 x 6.3 x 78.5	5	092001
	4.0 mm ID Spilt, with quartz wool	4.0 x 6.3 x 78.5	25	092220
	4.0 mm ID Split / Splitless with single taper	4.0 x 6.3 x 78.5	5	092017
	4.0 mm ID Split / Splitless with single taper	4.0 x 6.3 x 78.5	25	092229
	4.0 mm ID Split / Splitless with single taper and quartz wool	4.0 x 6.3 x 78.5	5	092019
	4.0 mm ID Split / Splitless with double taper	4.0 x 6.3 x 78.5	5	092018
	4.0 mm ID Split / Splitless with double taper	4.0 x 6.3 x 78.5	25	092230
	1.2 mm ID Direct, straight-through liner	1.2 x 6.3 x 78.5	5	092016
	1.2 mm ID Direct, straight-through liner	1.2 x 6.3 x 78.5	25	092224
	2.0 mm ID Splitless with Recessed Gooseneck	2.0 x 6.3 x 78.5	5	092013
	4.0 mm ID Split / Splitless. Recessed Gooseneck with quartz wool	4.0 x 6.3 x 78.5	5	092010
	4.0 mm ID Split / Splitless. Recessed Gooseneck with quartz wool	4.0 x 6.3 x 78.5	25	092223
	Graphite Sealing Rings – suitable for all above inlet liners used with the Varian Model 1177		10	072601

Injector Models 1075 / 1077
	4 mm ID, Split FocusLiner	4 x 6.3 x 72	5	092022
	4 mm ID, Splitless FocusLiner with top-end restriction	4 x 6.3 x 74	5	092026
	4 mm ID, Split Tapered FocusLiner	4 x 6.3 x 72	5	092025
	4 mm ID, Split FocusLiner with top-end restriction	4 x 6.3 x 72	5	092028
	2.3 mm ID Split FAST FocusLiner	2.3 x 6.3 x 72	5	092113
	4 mm ID, Split with quartz wool	4 x 6.3 x 72	5	092021
	2 mm ID, Splitless (slots at both ends)	2 x 6.3 x 74	5	092024
	2 mm ID, Splitless (slots at both ends)	2 x 6.3 x 74	25	092228
	Graphite Sealing Rings – suitable for all above inlet liners used with the Varian Models 1075/1077		10	072601

Injector Models 1078 / 1079
	3.4 mm ID, Split / Splitless FocusLiner	3.4 x 5 x 54	5	092037
	3.4 mm ID, Split / Splitless Tapered FocusLiner	3.4 x 5 x 54	5	092036
	0.5 mm ID, Straight-through liner	0.5 x 5 x 54	5	092031
	3.4 mm ID, Split / Splitless with single taper	3.4 x 5 x 54	5	092038
	2 mm ID, Splitless with single taper	2 x 5 x 54	5	092039
	Large Volume Injection (LVI) liner sintered glass	1 x 5 x 54	5	092245
	0.75 mm ID SPME liner	0.75 x 5 x 54	5	092117
	Graphite Sealing Rings – suitable for all above inlet liners used with the Varian Models 1078/1079		10	0726217

Injector Models 1093 / 1094
	0.5 mm ID, SPI liner (restriction = 0.25 mm)	0.5 x 4.6 x 54	5	092027
	0.8 mm ID, SPI liner (restriction = 0.25 mm)	0.8 x 4.6 x 54	5	092030
	0.8 mm ID, (restriction 0.5 mm) SPI liner (for 0.53 mm ID on-column)	0.8 x 4.6 x 54	5	092034

Packed Column Injector
	3 mm ID, Packed column liner for Varian Flash Injectors	3 x 6.3 x 72	1	092232
	3 mm ID, Packed column liner for Varian Flash Injectors	3 x 6.3 x 72	5	092233